Think of the way your refrigerator removes unwanted heat that accumulates when you open the door and place warm food inside. You can feel that heat coming back into the kitchen from the refrigerator’s exhaust fan.
In a similar way, a heat pump simply extracts the heat that’s present in outdoor air in winter and delivers it inside your home to keep you warm and comfortable.
In summer, the process reverses. The heat pump pulls the heat out of indoor air and releases it outside to keep your home cool and dry. A heat pump’s ability to both heat and cool makes it a very economical and efficient home comfort system.
A special liquid called a refrigerant circulates between the indoor and outdoor units, absorbing and releasing heat as it travels through the loop.
What are the parts of an air source heat pump?
A typical heat pump installation consists of two parts: an indoor unit and an outdoor unit. The indoor unit is called an air handler and looks similar to a gas furnace. The outdoor unit looks exactly like a central air conditioner in both size and appearance and contains the compressor.
Regardless of whether the heat pump is heating or cooling, the compressor is considered the “heart of the system” because it is the pump that circulates the refrigerant through the loop.
Because of its importance, experts recommend that you look closely at the compressor’s reputation and warranty when selecting a heat pump.
What is the difference between air source, geothermal and water source heat pumps?
Instead of using the surrounding air, a geothermal heat pump uses the energy from the ground. Similarly, a water source heat pump uses water (a pond, lake or the ocean) as an energy source.
Probably the most basic is the difference between the temperature of the heat source and the temperature at which the heat is delivered. The larger this difference, the lower the efficiency. For the ground source heat pump, the temperature of the ground is warmer than the air during the coldest part of the winter and colder than the air during milder weather in the spring and parts of the fall.
One of the most important characteristics of heat pumps, particularly in the context of home heating/cooling, is that the efficiency of the unit and the energy required to operate it are directly related to the temperatures between which is operates. In heat pump terminology, the difference between the temperature where the heat is absorbed (the “source”) and the temperature where the heat is delivered (the “sink”) is called the “lift.” The larger the lift, the greater the power input required by the heat pump. This is important because it forms the basis for the efficiency advantage of the geothermal heat pumps over air-source heat pumps. An air-source heat pump, must remove heat from cold outside air in the winter and deliver heat to hot outside air in the summer. In contrast, a ground source heat pump retrieves heat from relatively warm soil (or groundwater) in the winter and delivers heat to the same relatively cool soil (or groundwater) in the summer. As a result, geothermal heat pump, regardless of the season is always pumping the heat over a shorter temperature distance than the air-source heat pump. This leads to higher efficiency and lower energy use.
What is Electric Heating using a Heating Element
A typical heating element is usually a coil, ribbon (straight or corrugated), or strip of wire that gives off heat much like a lamp filament. When an electric current flows through it, it glows red hot and converts the electrical energy passing through it into heat, which it radiates out in all directions.
Heating elements are typically either nickel-based or iron-based. The nickel-based ones are usually nichrome, an alloy (a mixture of metals and sometimes other chemical elements) that consists of about 80 percent nickel and 20 percent chromium (other compositions of nichrome are available, but the 80–20 mix is the most common). There are various good reasons why nichrome is the most popular material for heating elements: it has a high melting point (about 1400°C or 2550°F), doesn’t oxidize (even at high temperatures), doesn’t expand too much when it heats up, and has a reasonable (not too low, not too high, and reasonably constant) resistance (it increases only by about 10 percent between room temperature and its maximum operating temperature).